Name: BLANK RAW CAST SPIKED HAND GUARDS
SKU: 249995

These are VERY limited. Once they are sold out, they are gone!

This unpainted resin armor is 4" across, 2" wide.

Please read everything below carefully:

-These are BLANK DIY (DO IT YOURSELF) resin pieces. They can be painted with acrylics, added to with epoxy clay or whatever preferred material, sanded, cut and otherwise modified to fit your personal tastes.

-You will receive a pair ( 2 identical pieces) of blank white wearable resin armor.

- The pics showing finished armor are just examples of what can be done. I strongly encourage buyers to add their own spin on these designs.

- These hand guards will arrive flat and should be heat formed to fit the curve of your hand ( see below for heat instructions)

- The spikes on these are pretty wicked! Dont be a jerk with em!

-Please do not purchase this item if you are unsure of what to do to finish it. I can not personally assist buyers with this project.

- These are RAW CASTS meaning they will need edge clean-up and air bubble filling. They are sent as- is direct from the mold with no sanding or finishing.

FITTING:

**A perfect fit is not guaranteed. You may have to expand the pieces for a better fit. You can do so using heat.**

-Warm the plastic with a hair dryer or on VERY low temp in your home oven ( place on cookie sheet and on a supportive bowl or cookware so the mask does not warp under it's own weight) You can also run it under hot water to soften the plastic as some buyers prefer.

- Only heat for around 5 minutes.

-Gently pull the sides apart while warm until you get the fit you want. Let the mask cool to set the shape.

- Once you get the shape you want you can reinforce the inside with a thin layer of ( can be smoothed with water and a brush once applied) or other lightweight epoxy putty ( ask for wood filler putty at the hardware store)

Since the plastic used for is heat sensitive meaning it is prone to mild warping. Do not leave it out in very hot weather if you do not reinforce it! If it warps, it can be restored to its original shape by applying low heat as mentioned above.

These are pieces of art made for light costuming and props. They should never be used in place of safety equipment or as protection. Use common sense, please. I would not recommend this as a piece to use for any LARP that may result in any serious blows that could crack this armor. I will not be responsible for any injuries sustained through misuse of this product.

By buying this item you acknowledge you have read all the information above and have reviewed the !

I always post on the page if there are ever any delays, store issues or news about what's coming up.

BLANK RAW CAST SPIKED HAND GUARDS

Product Details

These are VERY limited. Once they are sold out, they are gone!

This unpainted resin armor is 4" across, 2" wide.

Please read everything below carefully:

-These are BLANK DIY (DO IT YOURSELF) resin pieces. They can be painted with acrylics, added to with epoxy clay or whatever preferred material, sanded, cut and otherwise modified to fit your personal tastes.

FITTING:

**A perfect fit is not guaranteed. You may have to expand the pieces for a better fit. You can do so using heat.**

-Warm the plastic with a hair dryer or on VERY low temp in your home oven ( place on cookie sheet and on a supportive bowl or cookware so the mask does not warp under it's own weight) You can also run it under hot water to soften the plastic as some buyers prefer.

- Only heat for around 5 minutes.

-Gently pull the sides apart while warm until you get the fit you want. Let the mask cool to set the shape.

- Once you get the shape you want you can reinforce the inside with a thin layer of ( can be smoothed with water and a brush once applied) or other lightweight epoxy putty ( ask for wood filler putty at the hardware store)

Since the plastic used for is heat sensitive meaning it is prone to mild warping. Do not leave it out in very hot weather if you do not reinforce it! If it warps, it can be restored to its original shape by applying low heat as mentioned above.

By buying this item you acknowledge you have read all the information above and have reviewed the !

I always post on the page if there are ever any delays, store issues or news about what's coming up.

You May Also Like

Coco Reef Bungalow Floral Aura Ruffle Tankini, Blue Crush (U1B075)

KEEN Women's Uneek : White/Cornstalk

z supply: brayden midi dress - papaya

z supply: brayden midi dress - oatmeal

Black Studded Rhinestone Western Boot

Emma Jane Bootie - Matte Black

Flowers in Watering Can 31149 (420 Pieces)

Printed Flat 3/8 - White Skull (12 Pair Pack) Shoelaces

Keep My Secret Flatform Heeled Sandals

Pisces Hat Black